Therm O Web – Page 12

Heat & Bond One Direction Concert T-Shirts

September 29, 2014 by Amanda Leave a Comment

one direction concert t-shirt_7

In celebration of One Direction’s release of their new song, Steal My Girl, I thought I would share how to make your own 1D concert T-shirt. I love going to concerts and we always make some kind of fun T-Shirt to celebrate the occasion. (click HERE and HERE for Taylor Swift Concert T-shirt ideas) A few weeks ago One Direction was playing at the Rose Bowl so my husband and I took our 6 year old daughter. To quote her, “This is my dream come true!”

Then the following night I took some cute girls (so their moms wouldn’t have to go) and we rocked out! Yes – I am officially a One Direction Groupie!

DIY one direction concert t-shirt 2

Here is how you can make your own shirt!!

Supplies:

Small piece of red fabric

Small piece of white fabric

Heat n Bond Lite EZ print sheets

Black T-Shirt

Begin by printing a heart and 1D logo in reverse onto the EZ Print Lite sheets. These sheets are great because you can run them through your printer and not have to draw the pattern. I created the heart in MS Word and googled the 1D logo – easy peasy! Once you print the images, roughly cut out the heart about 1/4″ away from the heart. Press the heart to the wrong side of the red fabric. Do the same with the 1D. Cut out the heart and 1D on the pattern lines.

HeatNBond_EZPrintLite

Next peel off the backing on the 1D and press onto the heart. Leave the backing on the heart for now.
one direction concert t-shirt

I thought it would be easier to sew the 1D and then iron the heart onto the T-shirt – it’s hard to maneuver a T-shirt in a sewing machine – especially a small, child’s t-shirt. Sew around the 1D in black thread.

This is how the back should look:

Now, peel off the backing paper on the heart. It may take a little time to peel off all the paper in-between the letters. Now, press the 1D heart onto the black T-shirt. Sew around the heart twice in black thread.

I love to personalize my concert T-shirts with the date of the concert. I cut out the words on my cricut in vinyl. Then I removed the letters to leave a “stencil”. I put the vinyl stencil on the T-shirt and using a stencil brush and craft paint I stenciled the letters. Let the paint dry completely then remove the vinyl. It looks pretty good!!
one direction concert t-shirt diy

one direction concert t-shirt_5

DIY one direction concert t-shirt

We had too much fun! Here is a little video clip!!

1D Concert Clip

Filed Under: Heat n Bond, sewing, t-shirt, Therm O Web, Uncategorized

Monogram Peasant Top, a modified tutorial

September 22, 2014 by Amanda Leave a Comment

I am still loving Geofabulous from Blend fabrics! Here is outfit #3 for Sally! I followed the peasant shirt pattern in this McCall’s pattern:

The front and back pieces are cut out of solid pink cotton and the sleeves are the Stained Glass Navy print.

I printed the letter “S” on my computer and traced it to Heat n Bond Lite in reverse. Iron it to the wrong side of the monogram fabric. Cut out the letter, peel the back off and press to the front of the peasant top piece. Top stitch in matching thread.

Follow the instructions in the pattern to complete the top. I added a ruffle to the bottom. To do this, cut (2) 5″ x WOF pieces of coordinating fabric, I used Symmetry Pink.

Sew the (2) strips end to end, forming a big loop. Sew a rolled hem by folding the bottom edge up 1/4″ and then another 1/4″ and stitch close to the fold. Gather the top of the ruffle pieces by lengthening the stitch length to the maximum. Pull up threads and gather by hand. Match the seams on the ruffle with the side seams on the peasant top. Pin into place, distributing the ruffles. Sew along gathering stitching. Press the seam and top stitch if desired.

Filed Under: Blend Fabrics, clothes, FEATURED, patterns, sewing, Therm O Web

“Spooky” Quilt for Riley Blake Designs

September 8, 2014 by Amanda 1 Comment

I am so excited to share this quilt! Did you know I love Halloween and I love black cats? The fabric in this quilt is Riley Blake Design’s “Witch Hazel.” I love the vintage feel of the prints and the colors. I enlarged the cat from the theme print to create this cat silhouette. The pattern is being featured over at the Riley Blake Design Blog “Cutting Corners” if you want to make one 🙂

It’s 100 degrees here but all this Halloween sewing is helping me get in the mood for Fall. This quilt is hanging in my family room and it makes me smile every time I look at it….and it makes me want to adopt another black cat!!

There are many different parts to the quilt: a patchy center, appliqué, lace and pom pom trim and an appliqué scallop top and bottom border!

Filed Under: appliqué, fall, FEATURED, Halloween, Heat n Bond, quilt, Riley Blake, Therm O Web, tutorial

Modern 31 Halloween Pillow

September 2, 2014 by Amanda 1 Comment

It’s September which means my house is decorated for Halloween and I’m gearing up for a super crazy fall family schedule!! Don’t you feel like time just flies between now and Christmas? We better get the Halloween sewing done!!

I decorate my dining and living room for Halloween in Black and White and silver. I like how this pillow is slightly understated for Halloween. Here’s how you can make one…

Supplies:

16″ pillow form

1/2 yard black and white ticking

scraps of black fabric for numbers

Heat n Bond EZ print sheets or Heat n Bond Lite

Black metal zipper

31 pattern HERE

Begin by cutting (2) 17″ squares from the black and white ticking, set one aside for the pillow back.

Cut a 3″ strip off the top:

Lay out the pieces like this with the chunky zipper between:

Place the small strip right sides together with the zipper and using a zipper foot sew along the length:

Repeat with the other side:

Once the zipper is sewn in, press the seams. Prepare the appliqué by printing 31 on Heat n Bond EZ sheets or tracing on to Heat n Bond Lite. Iron the numbers to the wrong side of the black fabric. Cut out and press onto the pillow front. Top stitch around the numbers in black thread.

Using scissors you are not fond of, cut off the excess zipper on both ends.

Add a hand stitched detail by sewing a running stitch along both sides of the zipper with black embroidery floss.

Place the pillow back and pillow front right sides together and pin around the entire pillow. Make sure the zipper is open.

I cut 2 small strips of fabric and added them to both sides of the zipper where the seam would be to give it strength. Otherwise the only thing holding the zipper is a seam of thread. I also like to back stitch a few times over the zipper. With the metal zipper it is best to slow down the sewing speed and even manually move the needle so it can find its way around the zipper teeth. Sew around the entire pillow using 1/4″ seams

Turn right side out and add the pillow, it’s done!

Click the button for or more Halloween Projects

Filed Under: fall, FEATURED, Halloween, Heat n Bond, patterns, pillow, sewing, Therm O Web

Apple Appliqué Pillow Tutorial

August 21, 2014 by Amanda Leave a Comment

We are getting ready to start school next week. I thought this pillow would be a fun back to school decoration or even a thoughtful gift for a teacher. My tutorial is over on the Therm O Web Blog! I used Heat n Bond Lite which made the appliqué a snap!

I think I could add pom poms to ever project I make 🙂

Filed Under: appliqué, FEATURED, Heat n Bond, pillow, sewing, Therm O Web, tutorial

Summer Nautical Pillows

August 18, 2014 by Amanda 1 Comment

I know most of the stores have their fall and even Christmas decorations out on the shelves, but we still have one more week of summer vacation left and I am embracing every minute of it! Summer is my favorite! I love being with my children all day and just being FREE!!!!! I had to get in one more summer sewing project. I decorated my family room with a few nautical pops here and there and my couch was begging for some nautical pillows! These sew up in a snap!

Sea Critters Pillow (20″):

Don’t you just love this fabric from Dear Stella? We love sea critters at our house!

Cut the sea critters fabric 13.5″ x 20″

Seersucker Twist Red from Blend fabric 7″ x 20″

cotton batting 21″ or larger

20″ navy blue lace trim

2 yards navy fringe trim

20″ square Denim for the back

20″ or longer Zipper

accent fabric 4.5″ x 20″

20″ pillow form

Spray n Bond for basting

Sew them together using 1/4″ seams. Using Spray n Bond basting spray, baste the pillow top to the batting.

With the two pieces basted you can quilt as desired. Straight lines would be cute, I was impatient and free motion is faster for me 🙂

Trim off the excess batting

Add the navy blue lace trim

Sew the navy blue fringe to the right side of the pillow. I found it easier to use my walking foot. Curve the corners.

Prepare the back of the pillow. I have found this is the fastest way to finish a pillow. For the tutorial on how to do this, click HERE. I cut the back 20″ and then cut 3″ from the top for the zipper placement. The chevron piece is cut 4.5″ and then folded in half.

Now that the back is ready, place the right sided together, with the zipper open, and sew all the way round the pillow using 1/4″ seams. Turn and insert the pillow form.

I Heart Whales Pillow (20″)

This is very similar to my pink I Heart Whales pillow found HERE. Follow those directions for the Heat n Bond Applique.

Cut the solid white 10.5″ x 20″

Cut (2) Seersucker Twist Blue from Blend fabric 5.25″ x 20″

“I Heart” pattern click HERE

Whales from Blend’s True Blue fabric line

Prepare the appliqué pieces (directions HERE). Iron the pieces to the solid white fabric. Sew the blue fabrics to the white fabric using 1/4″ seams.

Using Spray n Bond, baste the pillow top to the cotton batting and quilt. Instead of appliquéing the images on before quilting, I sewed around each image in navy thread during the quilting process to give the pieces a little pop.

I finished this pillow the same way as the Sea Critters pillow with the same navy trim.

I love the backs of the pillows!

Filed Under: appliqué, Blend Fabrics, FEATURED, Heat n Bond, pillow, sewing, Therm O Web, tutorial, whale, whale week

Whaley Whale Quilt Tutorial

August 5, 2014 by Amanda Leave a Comment

Did I happen to mention I love whales and I love this True Blue fabric line from Blend? (haha) The fabrics needed to come together in a quilt and I LOVE how it turned out. Here it the pattern if you would like to make one – it is a quick quilt for sure!!

Finished Quilt Size: 40.5″ x 51″

Whale fabric 1 yard

Blue Wave fabric 0 .5 yards

White fabric – 1 yard

Coordinating prints (5) – fat quarters or quarter yard cuts

Spray n Bond Basting Adhesive

Begin with the whale strips….

Cut (3) 10″ x WOF Whale strips

Cut the blue wave fabric into (3) 4″ x WOF strips.

Free hand cut a wavy edge to each blue strip. You can do it!! Just let the scissors cut where they may. Mine are not perfect, but neither are real waves. Mine are all different heights and depths. Using the Spray n Bond, spray the wrong side of the blue waves and align with the bottom edge of the whale strips. Do this to each of the 3 whale and wave strips.

Top stitch close to the top of the waves in matching thread. I love how the whales look like they are swimming in the waves!

Prepare the block strips:

For each strip set……

Cut (7) white rectangles 2″ x 3.5″

Cut (5) patterned rectangles 5.5″ x 3.5″

Using 1/4″ seams, sew a white rectangle to the sides of each of the 5 patterned rectangles:

Press seams toward the dark.

Cut (2) 2″ x WOF strips of white and sew them to the top and bottom of the rectangle strip set. It should look like this:

Make (4) of these.

Measure the finished length of the rectangle strip and cut the whale strips to be the same length.

Lay the rows out like this and sew the rows together:

I quilted mine with random wavy lines similar to the blue wave strip. This was my first time ever using a Long Arm Quilt Machine! My friends over at Quilt EZ let me have a spin on one of their machines! The stitch regulator is a dream 🙂

Did I mention I love whales?

Filed Under: Blend Fabrics, FEATURED, quilt, Therm O Web, whale, whale week

Whaley Zipper Pouch

July 17, 2014 by Amanda Leave a Comment

If you know me at all, you aren’t surprised that a whale zipper pouch would be apart of “Whale Week”! I have gotten so much use out of my 1/2 yard of True Blue Whales fabric by Blend!!! I love the little anchor charm I found to use as the zipper pull. The lining of the bag is super cute with lifesavers and anchors on it!!

This tutorial is more of an overview, if you want extra details and you are new to making zipper pouches, check out My favorite zipper pouch tutorial.

Supplies:

Fat quarters or large scraps for the outer bag and lining

scraps for zipper tabs

Medium or light weight fusible stabilizer

Heat n Bond LIte

zipper

scrap of ric arc

Cut the denim outer bag, bag lining and stabilizer 8″ x 11″ (2) of each. Fuse the stabilizer to the wrong side of the lining fabric.

Iron the heat n bond lite to the wrong side of the desired whale. Fuse and cut the whale out. Position the whale as pictured below. Sew an accent piece of ric rac.

Cut 2 zipper tabs 1.5″ x 4″. Pres the ends under 1/4″ and then press in half.

Here you can see the 2 zipper tabs. (Sorry about the lighting, it was 11:00 pm).

Measure the zipper and the tabs so you have 1″ on each side of tabs (there will be extra). Sew the tabs to the ends of the zipper. Again, click HERE for more details on this process. Cut the folded piece of the tab and cut out the excess zipper. The goal with this is to reduce bulk in the seams.

Flip the zipper over and match with the top edge of the whale piece. Place one of the lining pieces right side down and align all the edges. Don’t worry about the zipper tabs, we will even them up in a minute.

Sew using a zipper foot. Press and do the same thing to the other side of the zipper so it looks like this:

Top stitch 1/8″ along the zipper. Trim the excess tab fabric. Match right sides with right sides and pin all the way around. MAKE SURE ZIPPER IS OPEN Sew using 1/4″ seam leaving a 2.5″ opening on the side of the lining fabric.

After you’ve sewn all the way around cut a 1.5″ notch out of each corner of the bag.

Match bottom seams and sew a 1/4″ seam:

Turn right side out and top stitch side opening. Yea! It’s done!

It’s the perfect little pouch to tuck inside a beach bag with all the little stuff that might get lost.

Filed Under: appliqué, Blend Fabrics, FEATURED, Heat n Bond, sewing, Therm O Web, tutorial, whale, whale week, zipper pouch

Whale Composition Book Cover

July 16, 2014 by Amanda Leave a Comment

I love composition books and I have written several tutorials for them. I use these cute covered books for everything: journals, notes, reminders, etc. Do you use a sewing journal? I am always writing patterns or changing existing patterns and I take notes as I go. This has totally saved me as I have all the notes in one place. Here is my current sewing journal – with only a few pages left in it:

This is an example of how fabulous my notes and sketches are 🙂 After I have all my notes and the project is finished, I type it up as a tutorial or pattern online. It’s time for a new composition and I’m feeling “whale-y!

This is the composition book I am using – make sure you measurements are 9 3/4″ x 7 1/2″

Supplies:

composition book

scraps of fabric

1/3 yard fabric for lining and flaps

batting

spray n bond basting spray

hair elastic

button

You can create any design as long as it measures 16/5″ x 11″ when you are finished

Anchor fabric 3″ x 16.5″

pink accent fabric (2) 1.25″ x 16.5″

whale fabric 4.5″ x 16.5″

flower fabric 3″ x 16.5″

Piece them together in this order using 1/4″ seams:

Press the seams in one direction. Using basting spray or pins, baste the top to the batting. Quilt as desired. I quilted 1/4″ lines on both sides of the seams. Square up the batting after quilting.

Take the hair elastic and baste it 1/8″ in the center on the left side of the book cover. Like this:

For the lining, cut a piece 16.5″ x 11″

For the flaps cut (2) 11″ x 10″ and press in half

Lay them out like this:

Lay right sides together and pin all the way around. Sew using 1/2″ seam allowance leaving a 3″ opening at the bottom to turn.

Turn right side out and press. Top-stitch the opening closed.

Insert the composition book and mark where you want the button. Remove the book and sew the button on with a needle and thread – inside the flap. It’s hard to see my button because it is blue.

And you’re done!! Perfect gift for just about anyone!!

Save

Filed Under: Blend Fabrics, FEATURED, gift, sewing, Therm O Web, tutorial, whale, whale week

True Blue Whale Skirt & Top

July 15, 2014 by Amanda Leave a Comment

I can’t get enough of these whales from Blend Fabrics!! We are all sporting whale shirts! I think we will be wearing these to Sea World when we go 🙂

The fabric is cute enough that all you need to do is add some Heat n Bond to the back side of the whale, cut it out and then iron it to what ever you want!

After I ironed the whale to the T-shirt, I top-stitched around the whale twice. Sally needed a complete whale outfit (I am pretty sure if I had enough fabric I would have sewn myself a whale skirt!!)

I used skirt “A” from the pattern book Little Sassy Skirts.

I have made these skirts over and over. The patterns are easy to follow and everything is done with rotary cutter measurements (a quilters dream!). This skirt is fun because you don’t have to have a lot of yardage, I only had half yards of the True Blue prints and I love the 4 prints all pieced together!